Are you one of those people who find it hard to wake up in the morning, do you do it in a bad mood, or does the hated sound of the iPhone alarm drive you crazy? Well, this article is for you, today we are going to see how can we configure the iPhone alarm so that it only vibrates and our awakening is a little softer, and our hearts do not break when we hear that unpleasant sound, which by default is associated with the alarm of our iPhone.
We can easily configure our alarm clock so that it only vibrates from the native Clock application of Apple Lossless Audio CODEC (ALAC), that appears on our iPhone.
By modifying some settings, you can quickly create an alarm that only vibrates, without any type of sound or audio being played when it jumps.
Vibrating alarms can be very useful if you want to wake up in the morning, but you sleep with someone else and you don't want to wake up the other person who sleeps with you, something that would probably happen if we used a conventional alarm.
How to create an iPhone alarm so that it only vibrates
To configure our alarm we simply have to follow these steps:
- We must look for the Clock app on iPhone
- We must go to the tab «Alarm» which is located at the bottom and then we have to click on the plus button + to add a new alarm, or we can also edit an existing alarm.
- In this new window, we must adjust the desired time at which we want it to sound and then click on the tab «Sound«.
- At the top of the Sound section, tap "Vibration«
- In this section we must choose the vibration pattern that we want to use in our alarm, and then we touch again where it says Sound.
- Back in the sound section, we will have to scroll down and choose the option «None» as sound, which is located at the bottom.
- We will touch the Back button and then the option «Save» to save the vibration alarm as specified
Now we'll leave the clock app with our vibrating alarm set and ready to wake us up a bit more gently.
Important recommendations to keep in mind
To make sure that the alarm vibrates once we have it configured on our iPhone, we must check that iPhone settings are correct For this to work.
We are many users who have our iPhone silent almost constantly, and we receive all calls and notifications through our Apple Watch, in complete silence, without anyone knowing when they call or write to us, an increase in our privacy.
But for this, we have to see the iPhone settings, because on many occasions we have it silent, but it is also we have the device vibration deactivated.
To check it we will go to Settings>Sounds and vibrations > Vibrate silently > and we will activate this tab. If we do not have it activated, even if we have correctly configured our alarm, it will not vibrate either due to the iPhone's own configuration, so this step is very important, to make sure that our alarm works as we wish, and find out about it by vibration of the iPhone.
On the other hand, the vibrating alarm of our iPhone will work even if we have activated any of the new concentration modes, even if we have the mode "Do not disturb" Activated at night, so that we do not receive any calls or messages at night, and rest properly, our vibrating alarm will work correctly.
Just like when we activate any other alarm clock, it is a very good idea test iPhone vibration and the alarm, before fully trusting it, if what we want is to use it for something important, like waking up in the morning to go to work.
The easy way to test this new vibrating alarm would easily be to set the alarm to activate one or two minutes from when we set it, so we can check that it works correctly, and that the vibration is strong enough to wake us up, if that is the case. .
It is worth mentioning that iPhone vibration makes some noise, but it highly depends on the surface the iPhone is placed on, if you put it on a mattress or pillow next to your head, it will be felt almost completely with very low sound. Therefore, if we want to minimize vibration noise as much as possible, we should place it in a soft position or even on your side of the bed. If we share a bed or room, the chances of waking up the other person when this type of alarm is activated are very low.
Do you have any tips, tricks, suggestions or tips on how to create silent alarms and use vibrating alarm clock on iPhone? Did you like the tutorial to create an iPhone alarm so that it only vibrates? Share with us in the comments!